Project Arborist · Tree Protection Plans · AS 4970-2025
Project Arborist and tree protection on development sites.
Development consents routinely require an AQF Level 5 Project Arborist to protect, inspect and certify retained trees from site establishment through to the Occupation Certificate. Arbzone works with builders, developers and project managers to keep tree conditions satisfied without holding up the program.
When do you need a Project Arborist?
- —Your DA or CDC conditions require an AQF Level 5 Project Arborist to be appointed
- —Tree protection fencing must be inspected and certified before demolition or construction starts
- —Excavation, trenching, footings or services are planned within the Notional Root Zone (NRZ) of a retained tree
- —A Tree Protection Plan is required for a DA, CDC, Review of Environmental Factors (REF) or audit
- —An auditor, certifier or Council has requested tree protection compliance documentation
- —Final certification of tree health and protection compliance is needed for an Occupation Certificate
How it works
01 — 05- 01
Conditions review
Consent conditions, the Arboricultural Impact Assessment and plans are reviewed to identify every tree-related requirement and hold point on the project.
- 02
Tree Protection Plan
A site-specific Tree Protection Plan to AS 4970-2025 sets out the protection fencing, ground and trunk protection, access routes, and works methodology within the NRZ.
- 03
Pre-construction certification
Tree protection fencing and measures are inspected and certified before works start, with a short compliance letter issued for the certifier.
- 04
Hold point inspections and supervision
Attendance at agreed hold points, such as demolition, excavation, piering, trenching and landscaping within the NRZ, including supervision of root pruning where approved.
- 05
Final compliance report
A final assessment of tree condition and protection compliance at the end of the project, to support the Occupation Certificate.
What you receive
- Tree Protection Plan to AS 4970-2025
- Tree protection fencing certification letters
- Site inspection and compliance reports at each hold point
- Supervision of works and root pruning within the NRZ
- Final compliance certification for the Occupation Certificate
- Clear per-visit pricing that suits construction programs
Why Arbzone as your Project Arborist
Arbzone understands construction sites as well as trees. Roy has spent more than 15 years working on the tools, so advice is practical, inspections are booked around the program, and paperwork arrives promptly. The aim is simple: protect the trees, satisfy the conditions, and keep the project moving.
Frequently asked questions
- What does a Project Arborist do?
- A Project Arborist is the AQF Level 5 arborist appointed to make sure retained trees are protected in line with the consent conditions and AS 4970-2025. This includes specifying and certifying tree protection, inspecting at hold points, supervising works within root zones and providing compliance reports.
- What is the difference between a TPZ and an NRZ?
- AS 4970-2025 replaced the Tree Protection Zone (TPZ) with the Notional Root Zone (NRZ), calculated the same way: 12 × the trunk diameter at standard height (DSH). The physically fenced area is now called the TPZ refined. Many consent conditions still refer to TPZs, and both terms are addressed in reports.
- Can you certify tree protection prepared by another arborist?
- Yes. Tree protection plans prepared by others can be reviewed, and fencing and measures certified on site, provided they meet the consent conditions and AS 4970-2025.
- How is Project Arborist work priced?
- Site attendance is charged per visit, with short compliance letters and detailed reports priced separately. This keeps costs transparent and tied to the actual hold points on your project.
